Rite-Media- QEP Clear  30"x66'  Heat Textile Transfer

Rite-Media- QEP Clear 30"x66' Heat Textile Transfer

Product Code: RM-QEP-CLEAR-3066

  • Availability: In stock

FEATURES

  • It is a thin, transparent polyurethane media with a matte finish.
  • It applies to Light Colored Fabrics Only;  Cotton; Polyester; Acrylic & Similar Fabrics
  • Allow 24 hours after application before washing
  • Iron the backside only
  • Max 37°C • Preferably inside out • NOT bleach, tumble-dry or Dry-clean.
  • It can be stored Up to 1 year in a dry room (15-24°C) away from sunlight & In vertical position (it is recommended to use a plastic bag to protect from dust)

APPLICATION  

1. Prepare your design in reverse (mirror) following the instruction of the printer manufacturer.
Printable medias are very sensitive: always handle with care, preferably with gloves.
2. Set your printing temperature to 45°C and drying temperature to 50°C.
3. Use the adequate printing profile 
4. Remove the product from the printer and wait for the complete drying of inks at room
temperature, at least 4 hours.
5. Weed the excess material.
6. The use of application tape is optional. It is possible to transfer your design by hand or with a
clear polyester application tape. Do not use a paper application tape.
7. Position and heat press your design on the garment protected by a silicone paper at 320°F–20
seconds – medium pressure.
8. If you used tape, peel it off when cold.

    





APPLICATION
APPLICATION
APPLICATION