Rite-Media- QEP PU v2 30"x66' Heat Textile Transfer
Press and move to zoom.
Mouse over image to zoom.

Rite-Media- QEP PU v2 30"x66' Heat Textile Transfer

Product Code: RM-QEP-PU2-3066

USD $349.00 /EACH
    • EACH
  • Availability: In stock

Looking to create stretchable full-color graphics from your Eco-Solvent or Solvent based printer/cutter?
Rite-Media QEP PU is the answer to your needs!


It’s thin enough to provide a great hand and stretchable enough for most performance wear. 
Recommended for use in Eco-Solvent, Solvent, and Latex based Printer/Cutters

SPECIFICATIONS: Polyurethane composition  •  Polyester Backing  •  White Base  •  Semi-Gloss/Matte Finish
•  70 Microns / 2.8 Mils  •  45°/60° blade
APPLIES TO: 100% cotton  •  100% uncoated polyester  •  poly/cotton blends  •  Lycra°/spandex   •  Leather


 APPLICATION

1. Prepare your design right-reading (DO NOT MIRROR) following the instruction of the printer manufacturer. Printable medias are very sensitive: always handle with care, preferably with gloves. 
2. Set your printing temperature to 45°C and drying temperature to 50°C. 
3. Use the adequate printing profile.
4. Remove the product from the printer and wait for the complete drying of inks at room temperature, at least 4 hours. 
5. Weed the excess material. 
6. Use Rite-Media- Transfer Tape for QEP-PU to transfer your design. 
7. Position and heat press your design on the garment protected by a silicone paper at 320°F–20 seconds – medium pressure.
8. If you used tape, peel peel it off when warm

NOTE:  For best results, we recommend performing a TEST prior to starting standard production.